A couple of new commands to make life easier with IP Telephony using Cisco CallManager and CallManager Express.
For address management, start with DHCP. You will need to add TFTP support, so the phones will know where to get their configuration and software. Add:
ip dhcp pool
To keep voice traffic in a different VLAN (200) from data (100), change the switchport configuration like this:
interface fastethernet 1/0/1
switchport access vlan 100
switchport trunk native vlan 100
switchport trunk encapsulation dot1q
switchport mode dynamic auto
switchport voice vlan 200
Also, do Auto QoS to keep everything flowing.