The ‘Cisco router’ Archives
Posted September 30, 2004 by

Enable Local Logging on a Cisco Router

In order to view the log of a Cisco router, you need to enable logging.

Category Cisco router

Posted September 29, 2004 by

Configuring a Cisco Router as a Terminal Server

When you have a home lab, you want to have console connectivity to all your routers at the same time. By using a terminal server (2509-2512 router range), you can accomplish this.

Category Cisco router

Posted September 29, 2004 by

Cisco: Configuring a Frame-Relay Switch

When you build a Cisco lab for home use, you can simulate a Frame-Relay cloud using a 2521, 2522, or 2600 series with an 8-port sync/async card.

Category Cisco router

Posted September 28, 2004 by

Viewing a Summary of All the Interfaces on a Router

If you want to view the status of all your interfaces on a router, you can use the show ip interfaces brief command.

Category Cisco router

Posted September 27, 2004 by

Cisco: How to Configure NAT [Network Address Translation]

This brief tutorial will show you how to configure NAT overload or how to enable Internet access to multiple PCs of your LAN using only one public IP address. This type of NAT can easily be used at home when you have a Cisco 800 series xDSL router.

Category Cisco router

Posted February 18, 2004 by

Authenticate Cisco RIP version 2 (RIPv2) Routers

The following tech recipe explains MD5 authentication for RIPv2 routers.

Category Cisco router

Posted February 18, 2004 by

OSPF Authentication on Cisco Routers

This tech-recipe describes configuring OSPF authentication to prevent unauthorized routing updates.

Category Cisco router

Posted February 18, 2004 by

Authenticate Cisco EIGRP Routers

To help prevent unauthorized routing updates, EIGRP can be configured to authenticate peers. The following tech-recipe explains how this is done.

Category Cisco router

Posted February 12, 2004 by

Configure On-Demand Routing (ODR) on Cisco Routers

ODR is used to allow hub routers to accept prefix information distributed via Cisco Discovery Protocol (CDP) from spoke routers. This tutorial explains configuring ODR.

Category Cisco router

Posted February 10, 2004 by

Using Reload to Configure Remote Cisco Routers Safely

Faraway routers can be safely configured by using a reload command first. If the router becomes unreachable as a result of a typo or other misconfiguration, you need only wait, and the router will reload itself to the saved configuration permitting you to try, try again.

Category Cisco router

Posted February 10, 2004 by

Configure ATM on a Cisco Router

ATM is growing in popularity as a wide-area network (WAN) medium. ATM offers small cell size and strict quality of service, allowing voice, video, and data to coexist.

Category Cisco router

Posted February 10, 2004 by

Configure a Cisco VWIC Card

Cisco VWIC cards need configuration before their serial ports will appear in the interface list. Once the VWIC is configured, HDLC, frame relay, or ATM with an AIM processor can be configured.

Category Cisco router